With great products like gradual tanners and self-tanning mousses, sunless tanning is easier than ever. The key to a beautiful tan is mastering the application technique and having the right tools.
One tool you don’t want to skip is a tanning mitt! If you’re in a hurry and need bronzed skin but don’t have a tanning mitt, there are some accessible alternatives to still get that perfect glow.
How To Properly Apply Self Tanner, When You Don’t Have Mitt
When it comes to applying fake tan, there are a few different ways to go about it. Some people prefer to use a sponge, while others use their hands.
Applying a self-tanner can be tricky, but with a bit of practice, you’ll get the hang of it. If you’re not using a mitt, you can choose any of the application methods discussed above, including using a sock, rubber glove, or your bare hands. When using any of these methods, it’s essential to try and spread the tanning product as evenly as possible throughout the skin, being extra careful around creases like your ankles and the back of your knees.
For these areas that bend, you may want to apply slightly less product as it may appear more orange simply from the movement of your body. You also want to wash your hands thoroughly with soap and water after these methods, especially if you use your bare hands.
Lastly, be sure to clean your products after each use. For socks, you should rinse them as much as possible in the sink to make sure no fake tan comes out in the wash. Do not wear the socks on your feet until they’ve been washed – excess tanner could still dye your feet.
By following these tips, you’ll be on your way to getting the perfect self-tan.
Once you’ve applied the fake tan, wait until it’s scorched before getting dressed. The product can take anywhere from 30 minutes to an hour to fully dry.
That’s it! These simple tips allow you to apply a fake tan without a mitt. Just be sure to take your time and avoid any dry or irritated areas.
General tips
Self-tanning can be a great way to get a summer glow without spending time in the sun. However, it’s essential to follow some tips for the best results. Here are a few things to keep in mind:
1. Choose a cool room to apply the tanner in – hot, humid rooms can cause the product to break down faster.
2. Apply lighter amounts of Tanner to elbows, knees, and other areas that absorb more of the product.
3. Avoid lotions with fragrances before and after applying self-tanner.
4. If mistakes are made while applying, use an exfoliator to remove any unwanted coloration and fix any flaws.
By following these tips, you can ensure that your tan looks natural and beautiful. And don’t forget to invest in a good tanning mitt!
What to use instead of a tanning mitt
1. Rubber Gloves (cleaning gloves)
When you start using a sock for applying fake tan, it’s best to turn it inside out. This will help the hose spread the product evenly. Apply the self-tanner product directly to your skin and use the sock to spread it out evenly
Since some of the product will be held on by the fabric, the process might go a bit smoother than it will while using a rubber glove. Make sure to replace your sock once you’re done with it, as you don’t want the product’s residue left on it and transferred to your other clothes. If you don’t have a spare sock, you can also opt for slipper socks – they tend to be thicker than the normal ones and inexpensive, allowing you to replace them quickly.
2. Cling Film
The smooth surface of the cling film will help you apply the fake tan product smoothly. Plus, you might even get better results than when using a mitt. Make sure to cover your entire hand with the cling film; if you leave any exposed spots, you’ll get tanned. Don’t wrap the cling film too lightly, though, or you’ll cut off the circulation.
3. Self-Tanning Wipes
4. Bare hands
However, be careful not to put too much fake tan on dark areas, such as your ankles, elbows, and knees. These areas are more prone to inflammation from rubbing against clothes. With a bit of care and attention, you can achieve great results with just your hands.
5. Paper towel
If you’re careful and take time, you can still achieve great results with a paper towel. Make sure to use a new one for each application so that you don’t transfer any old tanning product onto your skin.
6. Sponge
Make sure to use a new sponge for each application so that you don’t transfer any old tanning product onto your skin.
That concludes our guide on how to apply fake tan without a mitt. As you can see, there are several different options that you can use to get the perfect sun-kissed glow. So, get out there and start tanning!
7. Old t-shirt
If you’re careful and take your time, you can still achieve great results with an old t-shirt. Make sure to use a new one for each application so that you don’t transfer any old tanning product onto your skin.
8. Washcloth
If careful and take time, you can still achieve great results with a washcloth. Make sure to use a new one for each application so that you don’t transfer any old tanning product onto your skin.
9. Cosmetic puffs
Cosmetic puffs can be found in most drugstores and can be used in place of a mitt for
How To Prepare To Apply Self-Tanner Without A Mitt
When applying self-tanner, using a mitt can help you achieve an even application. However, if you don’t have a mitt or if you’re looking to save time, there are a few things you can do to prepare your skin before applying the tanner.
1. Exfoliate
Exfoliating your skin before applying a self-tanner will help create a smooth canvas for the tanner. This will also help to avoid any streaks or patchiness.
Moisturize – Moisturizing your skin before applying a self-tanner will help to hydrate the skin and make the tanner go on more evenly. It’s essential to choose a light lotion or gel so that it doesn’t leave your skin feeling greasy.
2. Apply A Barrier Cream
Suppose you’re concerned about staining your hands or nails. In that case, you can apply a barrier cream to these areas before applying the self-tanner. This will help to create a barrier between your skin and the tanner.
3. Careful With Waxing And Shaving
If you’ve recently waxed or shaved, you must wait at least 24 hours before applying a self-tanner. This will give your skin time to recover and avoid any irritation.
4. Invest In High-Quality Products Without Harsh Chemicals
Regarding self-tanner, it’s crucial to invest in high-quality products that won’t leave your skin feeling dry or looking patchy. Look for formulas that are free of harsh chemicals and fragrances. ( Checkout best self tanners without DHA)
5. Cold Water
Looking for a fool-proof way to get that perfect tan? Well, look no further! Taking a shower before applying a fake tan or getting a spray tan is a step many forget, but it can make all the difference. By blasting your body with cold water right before you get out of the shower, you close your pores and allow the tan to apply more seamlessly. You’ll also be less likely to experience blocked pores or skin irritation.
6. The Importance of Fake Tanning your Face
When it comes to fake tanning, your face is the first thing people will see. Make sure to take your time when applying self-tanner to your face. The best way to do this is by mixing a little moisturizer with the self-tanner. This will help it to spread more evenly and keep your pores from clogging.
7.Few More Hacks
If you apply these tips before, during, and after you apply self-tanner, you’ll have a beautiful tan even if you don’t have a mitt. Taking the extra time to tan your face correctly will pay off in the end!
7. Buy Masking Tape
Masking tape can help you avoid spots of self-tanner on the bottoms of your feet. If using a spray tanner, apply the tape before spraying to keep your feet clean.
Following these simple tips, you can apply a self-tanner without a mitt and achieve flawless results.
Following these simple tips can achieve a beautiful, even self-tan without using a mitt.
Now that you know how to prepare your skin for self-tanner check out our guide on how to apply self-tanner without a mitt!
The Benefits of a Tanning Mitt
When it comes to getting a natural-looking tan, people use a few different methods. Some people prefer to lay out in the sun, while others prefer to use a self-tanning product. But there’s another option that many people don’t know about: using a tanning mitt. A tanning mitt is a fabric glove with a rough surface that helps to distribute the self-tanner evenly on the skin. It can be used with any self-tanner, including lotions, sprays, and creams.
Using a tanning mitt has several benefits:
1) It’s more even than using your hands
When you apply self-tanner with your hands, it can be challenging to achieve an even tan. The Mitt helps to distribute the product evenly, so you don’t have any streaks or patches.
2) It helps you avoid orange hands
One of the biggest problems with applying self-tanner is getting it on your hands without turning them orange. The Mitt prevents this from happening since the tanning product is used directly on the Mitt and not your hands.
3) It’s less messy
Applying a self-tanner can be messy, especially if you’re using a lotion or cream. The Mitt helps keep the product off your hands and clothing, so you don’t have to worry about stains.
4) It saves product
When you apply self-tanner with your hands, a lot of the product is absorbed into your skin and doesn’t end up on your body. The Mitt helps to keep the product on your skin, so you can get the most out of each application.
5) It’s reusable
Unlike some self-tanning products that are single-use, the Mitt can be used over and over again. Just wash it after each use, so the product doesn’t build up and become less effective. Using a tanning mitt is a great option.
If you’re looking for a way to get a natural-looking option. It’s more even than using your hands, helps you avoid orange hands, is less messy, saves product, and is reusable. So next time you reach for self-tanner, grab a tanning mitt too!
Last Thoughts
Fake tanning can be a great way to achieve a natural-looking glow without spending hours in the sun. However, it can be tricky to get the hang of at first. In this article, I will share tips on applying fake tan like a pro.
To start with, you’ll need to choose a good product. There are many different types of fake tans available, so it’s crucial to find one that suits your skin type. If you’re unsure which one to choose, consult a professional or do some research online.
Once you’ve chosen a product, it’s time to prep your skin. This is very important, as it will help ensure that the fake tan applies evenly. Start by exfoliating your skin and then moisturizing it well. This will help remove any dead skin cells and ensure that the fake tan looks natural.
Now it’s time to apply the fake tan. The best way to do this is with a self-tanning mitt. If you don’t have one, you can use a sponge or a brush instead. Apply the fake tan in light circular motions, covering all of your skin evenly. Be careful not to miss any spots, as this can result in an uneven tan.
Once you’ve applied the fake tan, giving it time to develop is essential. Usually, you will need to wait at least 8 hours before showering. This will allow the tan to set correctly and ensure that it lasts for a long time.
Fake tanning can be a great way to achieve a natural-looking glow. However, it takes practice to get the hang of it. By following these tips, you’ll be on your way to achieving a perfect fake tan in no time! If you rather want to stick to regular tanning, check out these tips for fast tanning.